innovation-banner-desktop innovation-banner-mobile
Rear-Monoshox
Adjustable-Damping-FF
suspension
Inverted Front Fork
FF Golden
aluminium
transmission
break-sys
mast-cyl-disk2
Ride the future

Innovation at a Glance

Innovation is the heart of Endurance. Our R&D initiatives are critical for us to maintain our leadership and competitive edge in our chosen verticals. Being technology driven, we continue to invest in the best testing equipment and engineering software. We have initiated an advanced engineering cell to consistently meet our customer expectations and to support us in our innovation journey. We have built a culture of innovation where we challenge prevailing assumptions when warranted, reconceptualise issues to find solutions, and continue to simplify. We encourage our employees to share ideas without any inhibition and appreciate their efforts through Aspire and IdeaFest events.

"ASPIRE" an initiative to nurture innovation culture

We initiated project ASPIRE to make innovation as a way of life for Endurians. We celebrate our employees across functions at all levels for their innovative ideas via IdeaFest event. More than 12,000 ideas have been received so far which have improved quality, reduced cost, enhanced safety and have contributed to the environment. We further motivate our employees by inviting esteemed leaders to share their insights. Padma Vibhushan Dr. Raghunath Mashelkar, Prof. Anil Gupta are some of the speakers who have shared their wisdom with us.
Innovation at a Glance
innovation

Innovation at a Glance

Innovation is the heart of Endurance. Our R&D initiatives are critical for us to maintain our leadership and competitive edge in our chosen verticals. Being technology driven, we continue to invest in the best testing equipment and engineering software. We have initiated an advanced engineering cell to consistently meet our customer expectations and to support us in our innovation journey. We have built a culture of innovation where we challenge prevailing assumptions when warranted, reconceptualise issues to find solutions, and continue to simplify. We encourage our employees to share ideas without any inhibition and appreciate their efforts through Aspire and IdeaFest events.

"ASPIRE" an initiative to nurture innovation culture

We initiated project ASPIRE to make innovation as a way of life for Endurians. We celebrate our employees across functions at all levels for their innovative ideas via IdeaFest event. More than 12,000 ideas have been received so far which have improved quality, reduced cost, enhanced safety and have contributed to the environment. We further motivate our employees by inviting esteemed leaders to share their insights. Padma Vibhushan Dr. Raghunath Mashelkar, Prof. Anil Gupta are some of the speakers who have shared their wisdom with us.

img1
img4
img1
img3
img2
innovation_img
innovation_img

Featured
Innovation

Featured Innovation

innovation features

ENDURANCE PROVING GROUND

We are the first tier 1 supplier in India to develop a state-of-the-art proving ground to test our products directly on the vehicle. Spread across 29 acres, the Endurance Proving Ground (EPG), enables us to test our suspension, transmission and braking products across different surfaces including high speed performance track, ride evaluation track, ABS evaluation track, ride & handling track, gradient track, steering pad, mud & water trough, dust tunnel & country track. EPG is managed from a central control tower at the Operations Centre which includes the fully-equipped confidential workshops required for preparing the vehicles for testing, riders’ rest areas and the test track maintenance building. EPG has certified test riders trained by global experts in vehicle riding and evaluation of suspension, transmission & braking products.

ARAI (Automotive Research Association of India) has certified our EPG for testing two and three wheeled vehicles.

Innovation Journey
innovation track
innovation track element
SUV Car
1985-1995
1985-1995
b2
1985: Started Aluminum Die Casting manufacturing in Aurangabad, India
1996-2000
1996-2000
susp
1996: Started Suspension products manufacturing in Aurangabad, India
Innovation Journey ToolRoom
1996: Started Die Casting Tool Room facility in Pune, India
Collaboration
1998 - Collaborated for 2W Front Fork with Paioli Meccanica, Italy
collaboration
2000: Collaborated for 2W Shox with Paioli Meccanica, Italy
2001-2005
2001-2005
collaboration
2001: Collaborated with Adler, Italy for mfg. of 2W clutch assemblies & CVTs
gas filled shock absorber
2002: Setup Suspension R&D centre in Aurangabad, India
disk brake
2004: Started production of Disc Brakes assemblies in Aurangabad, India
launch
2004: Launched India’s 1st 2 wheeler gas filled shox
Yamaguchi-JIPM
2005: Engaged Yamaguchi San for implementing TPM in our plants
2006-2010
2006-2010
judder
2006: Provided Judder & Rattle solution for 2W Clutch Assemblies
Drum brakes
2007: Started manufacturing of Drum Brakes & TMC for passenger 3 Wheelers
CPDC
2008: Started Casting Product Development Centre (CPDC) in Pune, India
collaboration
2008: Collaborated with WP Suspension, Austria for 2W Inverted Front Fork & Mono Shox
drumdisk
2010: Started manufacturing of Drum Brakes & TMC for commercial 3 Wheelers
2011-2015
2011-2015
advanced
2012: Started Advanced Engineering Group in our R&D Centre, Aurangabad, India
timeline
2013: Started ECS & IP Cell in our R&D Centre, Aurangabad, India
Paper based friction plate material
2014: Introduced Paper Friction Plates for high performance & durability
developed
2015: Developed CBS for 2W in collaboration with Grimeca, Italy
2016-2020
2016-2020
collaboration
2018: Collaborated with US based company for design, dev. & mfg. of 2W ABS
Kolar Plant
2019: Started new plant in Kolar, Karnataka, India
AF - FGM
2019: Collaborated for Aluminium Forging with Forging Group Monale, Italy
Adler
2020: Acquisition of 99% stake in Italian 2W Clutch manufacturer Adler SpA
Grimeca
2020: Acquired Grimeca Srl, Italy for 2W Braking System Technology
1985: Started Aluminum Die Casting manufacturing in Aurangabad, India
b2
1996: Started Suspension products manufacturing in Aurangabad, India
susp
1996: Started Die Casting Tool Room facility in Pune, India
Innovation Journey ToolRoom
1998 - Collaborated for 2W Front Fork with Paioli Meccanica, Italy
Collaboration
2000: Collaborated for 2W Shox with Paioli Meccanica, Italy
collaboration
2001: Collaborated with Adler, Italy for mfg. of 2W clutch assemblies & CVTs
collaboration
2002: Setup Suspension R&D centre in Aurangabad, India
gas filled shock absorber
2004: Started production of Disc Brakes assemblies in Aurangabad, India
disk brake
2004: Launched India’s 1st 2 wheeler gas filled shox
launch
2005: Engaged Yamaguchi San for implementing TPM in our plants
Yamaguchi-JIPM
2006: Provided Judder & Rattle solution for 2W Clutch Assemblies
judder
2007: Started manufacturing of Drum Brakes & TMC for passenger 3 Wheelers
Drum brakes
2008: Started Casting Product Development Centre (CPDC) in Pune, India
CPDC
2008: Collaborated with WP Suspension, Austria for 2W Inverted Front Fork & Mono Shox
collaboration
2010: Started manufacturing of Drum Brakes & TMC for commercial 3 Wheelers
drumdisk
2012: Started Advanced Engineering Group in our R&D Centre, Aurangabad, India
advanced
2013: Started ECS & IP Cell in our R&D Centre, Aurangabad, India
timeline
2014: Introduced Paper Friction Plates for high performance & durability
Paper based friction plate material
2015: Developed CBS for 2W in collaboration with Grimeca, Italy
developed
2018: Collaborated with US based company for design, dev. & mfg. of 2W ABS
collaboration
2019: Started new plant in Kolar, Karnataka, India
Kolar Plant
2019: Collaborated for Aluminium Forging with Forging Group Monale, Italy
AF - FGM
2020: Acquisition of 99% stake in Italian 2W Clutch manufacturer Adler SpA
Adler
2020: Acquired Grimeca Srl, Italy for 2W Braking System Technology
Grimeca
  • 1985-1995
  • 1996-2000
  • 2001-2005
  • 2006-2010
  • 2011-2015
  • 2016-2020

Our
Innovation
Categories

Our Innovation Categories

Aluminium Die Casting

Aluminium Die Casting Aluminium Die Casting

Aluminium Die Casting

Endurance is the largest Aluminium die-casting organization in India. We are the market leaders in Aluminium die-casting and machining for 2, 3 & 4 wheelers. With over three decades of experience in design, development, and manufacturing of high pressure, low pressure, and gravity die-casting products for Indian and overseas OEMs, we have developed our capabilities and continuously strive for excellence. We are the first Indian organization to receive NADCA (North American Die Casters Association) Award for excellence in Aluminium die-casting in Ohio. Our overseas business in Italy and Germany caters to leading global 4 wheeler OEMs. We have acquired business for hybrid and electric vehicle models too. We have developed expertise in process conversion such as converting gravity die-casting, cast iron, and fabricated parts assembly to high pressure die-casting. We continue to innovate and use the latest technologies to ensure first time right products, increase the die life and enhance quality. Die-casting manufacturing also have support from our own state of the art tool room facility for design to develop dies in a highly technology enabled environment.

Suspension

Suspension Suspension

Suspension

We design and manufacture a wide range of front forks and shock absorbers to provide safe, stable and comfortable driving experience across all the road surfaces. We are equipped with best in class equipment to test and validate our suspension products simulating the wide range of road conditions making the products more reliable and safe. We are committed to make our products safer, lighter, more durable, reliable, and environment friendly to reduce carbon footprint. We are the only company in India to design, develop and manufacture inverted front forks and mono shock absorbers, serving our Indian & overseas customers. We continue to innovate and develop higher end suspension products including mechanical and electronic adjustable damping force forks & shock absorbers with hydraulic spring force adjustment, air suspension system and semi-active suspension systems to deliver best in class riding experience.

Transmission

Transmission Transmission

Transmission

Endurance is a well-established player in transmission systems for 2 & 3 wheelers. With over two decades of experience on Indian driving habits, we design, develop and manufacture a wide range of reliable clutches and CVTs. We have built capabilities to ensure first time right and design innovative products through VAVE. We test our products by simulating the exact vehicle operating conditions as well as test our products on the vehicle to deliver reliability and performance. We have developed cork & paper type friction clutches, highly fuel efficient CVT designs and VAVE designs of Anti-hop clutches. The Endurance anti-hop clutches offer enhanced performance during downshifting, sudden braking and takeoff leading to better vehicle stability.

Braking Systems

Braking Systems Braking Systems

Braking Systems

Endurance is a leading player in high performance braking solutions for 2 & 3 wheelers. With over 14 years of experience, we have developed capabilities to deliver reliable and first time right products to our customers. Our braking solutions are designed for lesser stopping distance and better stability during deceleration, thereby ensuring rider safety. Being safety products, every component of our brake system is designed for increased structural rigidity and durability. Our products undergo rigorous testing for performance and durability using the best in class testing equipment in our in-house R&D facility. We also take utmost care in selecting the finest and environment friendly friction linings and tune our braking systems. We design, manufacture and deliver fully hydraulic as well as hydro mechanical type CBS with both Disc/Disc and Disc/drum combinations. We offer hydraulic drum brake systems with our patented integral strut assembly with external parking lever mechanism. In addition to these innovations, we have partnered with a leading ABS manufacturer to design, develop, and manufacture ABS systems for 2-wheelers which will be in mass production in 2021.

Presence across the world

We have 4 dedicated DSIR (Department of Scientific and Industrial Research) approved R&D Centres located in Aurangabad and Pune, India for each of our product verticals. There are 2 Technical Centres located in Turin and Rovereto, Italy.

world map
India (Aurangabad & Pune)
Italy (Turin & Rovereto)

Partner with Us

    Find the perfect product

    Enquiry Form

      Enquiry Form

        Apply Now

          Locate a dealer near you

          Please select the field

          Corporate Structure

          Corporate Structure

          Download Brochure